超声波倒车雷达设计

论文编号:JD931   论文字数:7792,页数:21

 摘  要：本文介绍了运用单片机技术实现倒车雷达系统测距的实现原理，利用超声波实现了无接触测距。首先介绍了61单片机的性能和特点，分析了以61单片机为主控单元的系统硬件和软件设计，并对基于超声波测距的倒车雷达系统的设计进行了深入探讨和研究，该系统分为测距模块、系统控制模块和显示模块。最后对该系统进行了试验和误差分析，使我们对于系统的各种性能有了进一步认识。试验结果显示，该系统对距离的测量具有较高的精度，其主要技术指标达到了系统设计要求。
   关键词：倒车雷达；SPCE061A单片机；超声波测距

 The Design of Reverse the Car Radar of Ultrasonic Wave
   Abstract: The thesis introduces a kind of machine which takes use of a single slice machine technique to carry out electric circuit of reverse the car measure of the radar system to be apart from to carry out principle,the system uses the ultrasonic wave to realized distance measurement without contact. Furthermore,the thesis briefs the functions and features of SPCE061A single-chip microcomputer. analyze with 61 machines for the lord control unit of system hardware and software design, and reversed the car develop of the radar system to carry on through study and research towards measuring to be apart from according to ultrasonic wave of. That system is divided into measure to be apart from mold piece, the system control mold piece and manifestation mold piece. the end to that system carried on to experiment with error margin analytical, make us have further understanding to various function of system.Experiment a result a manifestation, that system has higher accuracy to the distance diagraph of distance, it the main technique index sign come to an a system design a request.
Keywords: reversing radar；SPCE061A.MCU；ultrasonic distance measurement

目 录

摘  要 I
Abstract I
1 引言 1
1.1 课题研究的目的及意义 1
1.2 倒车雷达系统的研究现状 1
1.3 本文主要内容 1
2 超声波测距原理 1
2.1 超声波传感器原理 2
2.2 超声波测距系统工作原理 4
2.2.1 脉冲反射法 4
2.2.2 脉冲计数方法可行性分析 4
3 SPCE061A单片机控制系统 5
4 超声波测距系统的电路设计 6
4.1 系统总体方案介绍 6
4.2 超声波谐振频率调理电路 6
4.3 超声波回波接收处理电路 7
4.4 模组配合61板进行距离测量 9
4.4.1 模组跳线设置 9
4.4.2 测距模组与61板的连接 10
4.4.3 下载程序并进行距离测量 10
4.4.4 测量结果理论分析 11
5 误差分析与结果展望 12
5.1 误差分析 12
5.2 总结与展望 13
参考文献 13
谢    辞 14
附    录 15

相关论文