转筒干燥器的总体与结构设计

论文编号:JX1639  论文字数:11852.页数:35 附任务书，开题报告，外文翻译,CAD图

转筒干燥器的总体与结构设计
摘要：在化学生产中，有些原料，半成品或成品含有或多或少的水分或其他溶剂。为了满足使用的要求，常采用干燥的方法将这些水分或溶剂除去，而干燥的方法和设备是多种多样的。
 回转干燥器是一种常见的干燥设备。它适合于颗粒状，湿物料的干燥，如纯碱，硝铵，和各种盐类等。回转干燥器能使物料在滚桶内翻动，抛撒，与热空气或烟道气充分接触，干燥速度快，生产力较高，因此广泛应用于化工，食品等工业生产中。
 设计的主体部件是1000×8000mm规格的转筒部分,筒的转动依靠齿轮带动,筒的重量主要由两个托轮支撑,而托轮则由两个轴承支撑,抄板翻动物料。
 该设备生产能力大，结构简单，但是效率较低。

关键词：回转   托轮   齿轮   轴承   抄板
      

ROTARY DRYER WITH THE STRUCTURAL DESIGN OF THE OVERALL
Abstract: In the processing of the chemistry industry, some materials，semi-finished produces or finished produces  contain more or less imprecision or other solvents．In order to satisfy the requirements of use, we need rid them by drying technology. There are many kinds of  the methods equipments for drying．
 The drying machine of turning cylinder is an old equipment and are in common use .It is fit to dry the wet materials ,such as sulphur ，all kinds of salts etc .It can make the materials turning over，throwing or scattering , and contact with the hot air amply .It’s drying speed is faster, and the manufacture ability is also very good .So it applies to the processing of the chemistry ，foodstuff etc widely.
 The assignment of the design is the turning around section of serial 1000×8000mm .The turning of tube-shaped object depends on the gears .The weight is sustained with two supporting wheels .The supporting wheels is sustained with two bearing .The funtion of lifting of board is to turn over the matters.
 The manufacture ability of this equipment is larger ,and the structure is simple ,but the efficiency is very lower.
Keywords: turning around ,supporting wheels ,the gears ,bearing ,lifting board .
 目   录

1 引言 1
2 概述 2
2.1 干燥的目的 2
2.2 干燥机的选用基准 2
2.3 转筒干燥器的主要组成及作用 3
2.4 转筒干燥器的工作原理 4
2.5 转筒干燥器的特点 4
2.6 转筒干燥器的分类及适用范围 5
2.6.1 直接加热式 5
2.6.2 间接加热转筒干燥器 6
2.6.3 复式加热转筒干燥器 6
3  转筒的结构部分 8
3.1 筒 体 8
3.2 滚  圈 11
3.3 托  轮 13
3.4  抄   板 14
3.5 电机的选择 15
3.6  减速机的选择 16
3.7 联轴器的选择 18
3.8  轴的校核 19
3.9 轴承的校核 23
3.10 齿轮的校核 24
3.11  转筒的密封 30
4 转筒的安装、调整和运转 31
5 结论 32
参考文  33
致   谢 34

相关论文