全自动揉搓式洗衣机的设计 机电一体化设计

包括,任务书,开题报告,外文翻译,文献综述,说明书,所有设计图,论文字数:22225,页数:57  论文编号:JX086 

摘 要

现有的洗衣机中最为常见的为波轮式洗衣机和滚筒式洗衣机。波轮式洗衣机是依靠波轮的转动来带动衣物和洗涤液进行洗涤；而滚筒式洗衣机是依靠滚筒的连续转动或定时反向来洗涤衣物。由此可看出，这两种类型的洗衣机都是依靠单一的运动方式来洗涤衣物，而在此设计中将这两种洗涤方式揉和起来，将两种运动方式结合起来，增加了衣物在竖直方向上的运动。使衣物既能像在波轮式洗衣机中那样由波轮带动衣物进行洗涤又能像滚筒式洗衣机那样依靠水流的力量洗涤衣物，并且还可以像手洗那样对衣物进行揉搓，集各种洗涤方式于一身，对衣物进行更为彻底的洗涤。由于洗衣机的基本功能是对衣物的洗涤，关键在于进行洗衣程序的控制。所以,本文就洗衣机的机械设计和电气控制进行了探讨,实现全自动揉搓式洗衣机的设计
关键词：波轮  滚筒  揉搓 全自动
Abstract ：
In what the existing washer is most common is the impeller type washer and the roller washer. The impeller type washer is depends upon impeller's rotation to drive the clothing and the cleaning solution carries on the wash; But the roller washer is depends upon drum's continuous rotation or fixed time reverse washes the clothing. From this may see, these two type's washer is the dependence sole mode of motion washes the clothing, but kneads together in this design these two wash way, unifies two modes of motion, increased clothing's in vertical direction movement. Enables the clothing both to look like in the impeller type washer such drives the clothing by the impeller to carry on the wash and to be able to look like the roller washer such dependence current of water the strength wash clothing, and may also look like the hand to wash such carries on to the clothing rubs, the collection each wash way in a body, carries on a thorougher wash to the clothing. Because washer's basic function is to clothing's wash, therefore, the key lies in carries on washes clothes the procedure control. Therefore, this article has carried on the discussion on washer's machine design and the electric control, realizes the completely automatic to rub type washer's design
key word: The impeller drum rubs the completely automatic

目  录
摘 要 2
前  言 4
第一章  绪  论 5
1．1设计思想 6
1．2工作原理 6
第二章 洗衣机的原理、分类和驱动方式 7
2．1洗衣机的原理 8
2．2洗衣机的分类 9
2．3洗衣机的驱动分类 11
第三章 电动机的选择 13
3．1概论 13
3．2洗涤电动机 13
第四章  整机设计 16
4．1波轮的分类 16
4．2波轮的参数及性能 16
4．3波轮形状及参数的选用 17
4．4带传动的设计（一） 18
4．5带传动的设计（二） 20
4．6螺纹轴的设计 22
4．7波轮轴的设计 26
第五章 电气部分设计 29
5.1设计概述 29
5.2系统总体框图 29
5.3 元器件介绍 30
5.3.1 AT89C2051 30
5.3.2  W7805 31
5.3.3  74LS139 32
5.4 洗机机功能分析 33
5.5 全自动洗衣机的控制功能 34
5.6 电路图中各部件的分析 36
5.7全自动洗衣机的部分电路分析 38
5.8洗衣机控制程序设计 40
5.8.1 程序流程图 40
5.8.2 源程序 44
第六章   相关部件的设计和安装说明 53
6．1  洗衣机的底座及外壳 53
6．2  位开关和拨动开关 54
6．3桶（盛水桶）及其安装 54
6．4  桶的结构设计 55
结  论 55
参考文献 56
致  谢 57

相关论文