日产130吨芯浆生产线工艺设计

论文编号:QH014  论文字数:15475,页数:44  附CAD图

年产10万吨涂布白纸板制浆造纸综合工厂设计   重点：日产130吨芯浆生产线工艺设计

 摘 要：本设计为年产10万吨涂布白纸板制浆造纸综合工厂设计。设计重点为：日产130吨芯浆生产线工艺设计。本设计以废纸为主要原料，经过碎解、筛选、洗涤、净化等工序，制备满足抄造涂布白纸板要求的芯浆。设计内容主要包括以下四部分：第一部分包括以下内容：工程设计的背景、工程设计的必要性和需求预测与设计规模；第二部分包括以下内容：芯浆工艺流程的确定，工艺参数的选定，浆水平衡计算，在此基础上进行设备选型，最后进行平面布置设计，按要求绘制若干张图纸。第三部分包括以下内容：全厂生产车间组成和车间生产综合叙述；第四部分主要包括一些辅助工程的设计：厂房建筑与结构、给水与排水、动力、自控与仪表和环境保护与综合利用以及劳动安全卫生等。
 
关键词：涂布白纸板；芯浆生产线；工艺流程设计；设备选型设计；平面布置设计

 Annual 100000 tons of coating whitepaperboard pulp integrated plant design
 Key: 130 tons daily of pulp production line core process design
 
Abstract: The design for the annual production capacity of 100,000 tons of Coated White Board integrated pulp and paper plant design. Design as follows: 130 t/d core pulp production line process design. The design for the main raw material for paper, after breaking solution, screening, washing, purification processes, preparation of copy-made to meet the requirements of coated white board core slurry. Design includes the following four parts: the first part include the following: the context of engineering design, engineering and demand forecasting the need for scale and design; the second part includes the following: the determination of core plasma process, the selection of process parameters , serofluid balance calculation, in this based on equipment selection, layout of the final design, drawn by the requirements of a number of Zhang drawings. The third part includes the following: the composition of the whole plant production and the production of a synthesis of the workshop; fourth part mainly includes the design of ancillary works: the construction and structure of plant, water supply and drainage, power, control and instrumentation and environmental protection and comprehensive utilization of and labor safety and health.

Keywords：Coated Paperboard; core pulp production line; process design; equipment selection design; layout design

目  录
中文摘要 I
英文摘要 II
目录 III
1  绪论 1
1.1 设计背景与发展状况 1
 1.2 工厂设计的可行性分析 4
 1.3 工程设计的发展状况 5
 1.4 市场需求和设计规模 6
2 厂址选择与厂区总平面布置 7
 2.1 址选择厂 7
 2.2 厂区总平面布置 8
3 生产工艺设计 12
 3.1 全厂生产车间组成 12
 3.2 车间生产综合叙述 12
 3.3 车间技术经济指标和工艺参数 13
3.4 浆水平衡计 16
3.5 主要设备选型及操作 25
4  供水、排水以及三废处理 27
 4.1 供水 27
 4.2 排水 28
 4.3 三废处理 29
5  蒸汽及采暖通风 31
 5.1 动力 31
 5.2 供热 31
5.3 采暖通风 32
6  安全技术及防火 33
6.1 污染源产生的有害物质 33
6.2 防护措施 33
7  技术经济 34
8  建筑部分 36
8.1 建筑标准 36
8.2 建筑材料的选用 36
8.3 对有特殊要求的厂房建筑处理措施 36
9 设计总论 37
致 谢 38
参考文献 39

相关论文