年产25万吨瓦楞原纸制浆造纸工厂设计

论文编号:QH040  论文字数:10054,页数:38  附CAD图

年产25万吨瓦楞原纸制浆造纸工厂设计 重点：网部及压榨部工艺设计
摘要：瓦楞箱纸板是浙江省的主要纸产品之一，其需求呈现快速增长的趋势。网部及压榨部对瓦楞原纸的质量有着决定性的影响。通过对网部和压榨部的工艺设计，学生可以更加系统地掌握瓦楞原纸生产的流程及工艺，并初步掌握工艺设计的程序和工作方法。本文是对年产25万吨瓦楞箱纸板的造纸车间流送系统和网部工艺的初步设计。设计的内容主要包括：（1）建厂的可行性分析；（2）全厂产品结构和生产方法说明；（3）本车间产品特点及工艺流程、工艺条件的选择；（4）各主要设备物料衡算、设备选型计算；（5）车间水、电、气、消耗技术经济指标及劳动、组织人员编制；（6）车间工艺设备布置说明；（7）设计成果综合评述。

关键词：瓦楞箱纸板；网部；压榨部；生产工艺

A pulp and paper-making multiple-producing mill, producing 250000 tons of corrugated container board every year
Focus: technological design of wet section and press section

Abstract: The corrugated container board is one of the main paper product in Zhejiang province. Wet section and press section is the key parts to the quality of the corrugated container board. Through the technological design of wet section and press section, we can have a great understanding of the process and technology of production of corrugated container and get familiar with the procedure of technical design and operating methods. The article is about the primarily design of supplying pulp system and wet section technology of papermaking mill which producing quarter million tons of corrupted container board. The main contents of design include: (1) Feasibility analysis of building a mill；(2)Product mix and production process of all mill；(3)Product features of the workshop and the choice of technological flow and process condition；(4)Mass balance and equipment selection of the main equipments；(5)Consumption indicator of water, gas and electricity and size of personnel force；(6)Arrangement explanation of processing equipment in the mill；(7)General survey of design

Keywords: corrugated container board; wet section; press section; production technology

目  录
1 绪论 1
1.1 设计背景与发展状况 1
1.2 工厂设计的可行性分析 1
2 厂区和车间布置及产品标准说明 3
2.1厂区总平面布置 3
2.1.1 厂区总平面布置的基本原则 3
2.1.2厂区总平面布置概述: 5
2.2车间设备布置 6
2.3 运输设计 7
2.4 厂区绿化 7
2.5 车间工作制度 7
2.6 产品有关标准 9
3 全厂产品结构和生产方法 11
3.1 生产工艺 11
4 生产工艺设计 12
4.1 生产工艺流程 13
5 物料衡算和设备选型 15
5.1浆水平衡计算 15
5.2浆水平衡明细表 23
6 供水、排水等能耗以及三废处理 26
6.1水、电、气等供应 26
6.2 排水 26
6.2.1 生产排水的水质特征 26
6.2.2 排水口 26
6.3 三废处理 27
6.4 产品能耗状况 29
7 安全技术及防火 30
7.1 污染源产生的有害物质 30
7.2 防护措施 30
7.2.1 污染防护 30
7.2.2 安全防护 30
7.3 人员培训 31
8 设计总结 32
致 谢 33
参 考 文 献 34

相关论文